• June


  • 591
  • 0
Cost of Replacing or Repairing a Garage Door Spring?

Cost of Replacing or Repairing a Garage Door Spring?

You’re about to take your car from the garage when you discover the automatic opener has stopped working. It could be that your door creaking and clicking, but it doesn’t be able to move. You can, however, pull the emergency cord to raise the door and then back your car out. However, you’re not going to wish to operate the manual opener for long.

The majority of problems in garage doors are due to a damaged spring. Here’s how you can fix it and what it will cost.

Mike Garage Door Spring Costs:

DIY : $20-$80
Installation by a professional: $180-$300

How Does a Garage-Door Spring Work?

Garage door springs help counteract the pull of gravity, making the door much easier to lift and open. If a garage door is closed, tension is created. The tension will be released as the door opens.

They also serve as security mechanisms that prevent doors from falling onto you in the event of; A garage door that has an unbroken or damaged spring is not to be opened or closed with an automatic door opener. An emergency can be handled by opening the door by hand.

What is the cost of replacing garage door springs?

To repair garage door springs yourself, you’ll need to spend 20 to $80 for the parts. If you’d like professional installation, be prepared to spend between $180 and $300.

Mainly two types of garage door springs.

Garage-door springs are divided into two main categories: extension springs and torsion springs. Here’s a quick overview:

Extension Springs

Extension springs are usually slim and long. They are positioned parallel to the doors’ tracks. They are used to store energy by either extending or stretching as doors are moved.

There are three kinds:

  • The most common type is the open-looped extension spring
  • Double-looped extension spring
  • Spring clipped to the end of the extension

 Torsion Springs

Based on the dimensions of the door, its weight, and the strength of the garage doors, they may include one to four torsion springs. The springs are positioned on the metal shaft, located directly over the door’s opening. Torsion springs are wound up to different settings of torsion based on the configuration of their assembly.

The various types of assembly are

  • Most often: a typical torsion spring
  • Early-set spring torsion
  • Torque-master spring torsion

Is your spring broken? How do you know?

Here are some signs to tell the spring is damaged:

  • The doors are heavy. They’re difficult to open.
  • The door is bent or crooked at the top
  • The door won’t stand up on its own
  • The safety cable and the pulley are untied and hang down
  • Spring is unwinding and produces loud noises
  • The door makes jerky movements when the door is opened
  • The door closes, but it slams as it is slamming
  • The manual emergency rope doesn’t work.
  • The door opens, but then the safety lock prevents it from falling.

Why do springs break?

There are numerous reasons why a spring could break. Some of the most frequent causes are:

  • Rust
  • The lack of the ability to lubricate
  • Cheap spring installation and low-quality
  • Extreme temperatures
  • Wear and tear from regular use

Extension Springs Replacement

The replacement of your extension springs is an easy DIY project. 

  1. Lift the garage door to take off the spring tension, then secure the door.
  2. Remove the garage door opener.
  3. Tape is used for marking the present location on the pulley.
  4. The spring must be disconnected from the track and pulley bracket. Then remove the cable for safety from the previous spring.
  5. Find the spring replacement you’ll need according to the door’s weight. Extension springs are colored to show how much weight they can carry.
  6. Connect the safety cable to the new spring and then connect it to the bracket for the track.
  7. Connect the safety cable to the pulley, ensuring the pulley cable is not from the security cable. Use the tape you laid earlier to make sure your pulley is in a proper position.
  8. Unclip the clamps, then reconnect your garage door opener.
  9. Check the garage door’s performance using the new springs to check whether it is working as intended. If the doors closing is too fast or not fully closing, Try adjusting the pulley or extension springs hardware.

Torsion Springs Replacement

Since torsion springs are subject to the pressure of a lot and stress, they’re less durable to change and also a lot riskier. The spring may break and then fly around, damaging your vehicle or home. Experts recommend the fitting of the torsion spring.

What is the lifespan of garage door springs?

New springs can last for seven to 14 years, depending on how you utilize your garage.

Here are some tips to help your springs last longer

It is possible to prolong the lifespan of your springs by cleaning the tracks of your doors by using the WD-40. It removes wax-like accumulation, grease, and other debris. It is also possible to lubricate the springs using a silicone-based lubricant to avoid corrosion and rust. Lubricate your door’s hinges on the interior of the door, which bends when the door is lifted.

Finally, make sure the door is balanced by switching the door opener into manual mode and then opening the door manually. If your door isn’t staying open on its own or is challenging to open or close, then it’s time to replace the springs.

If you want to Replacing or Repairing a Garage Door Spring with advanced features; contact the door repair expert or Call (970) 682-3353. We will inspect your door at your home.


© Copyright 2023 Mike Garage Door Repair - All rights reserved